Iveco Daily 4x4 40-10 & NJ2045 Parts Guide: Identification, OEM Numbers a Fitment

Iveco Daily 4x4 40-10 & amp; NJ2045 Parts Guide

Finding replacement parts pro older Iveco Daily 4x4 může být difficult, especially when a vehicle má been rebuilt, modified pro overland travel nebo produced pro regional market. Similar-looking components může have different dimensions, mounting points nebo connections, takže vehicle name alone vá rarely enough do confirm fitment.

This guide explains Jak owners a workshops může identify parts pro Iveco Daily 4x4 40-10 a closely related NJ2045 platform before placing n order.

Je NJ2045 s same jako Iveco Daily 40-10 4x4?

V NJ2045 vá closely related na Iveco Daily 40-10 4x4 platform a shares many vehicle systems a component designs. However, this does ne mean every part vá automatically interchangeable. Production year, engine, axle version, left- nebo right-hand installation position, supplier changes a previous vehicle modifications může všechny affect compatibility.

Pro this reason, parts should být matched using several identifiers rather than s model name alone.

Explore s Iveco Daily 4x4 NJ2045 parts catalogue.

Information do collect before searching pro part

Prepare jako much ze dne following information jako possible:

1. Vehicle model a production year.

2. VIN nebo chassis number.

3. Engine model a displacement.

4. OEM nebo reference number printed n vá original part.

5. Installation position, such jako front, rear, left nebo right.

6. Clear photographs ze dne complete part a mounting points.

7. Connector type, spline count, thread size nebo other distinguishing details.

8. Important dimensions measured from s original component.

Pro identification support, send photographs a available vehicle information before ordering. Viz SUONAMA fitment, OEM number a shipping FAQ.

Proč OEM number matters

A OEM number vá usually s fastest cesta narrow a searchAle to je... should still být checked against s actual component. number může být superseded, used within n assembly nebo associated with more than jeden production variation.

When s original number vá unreadable:

• Clean s component carefully a photograph všechny stamped nebo moulded markings.

• Check both s installed part a vehicle parts documentation.

• Compare mounting points, connectors a dimensions.

• Avoid ordering solely because a product photograph looks similar.

Useful search formats include:

• Iveco Daily 4x4 + OEM number

• Iveco 40-10 + part name + OEM number

• NJ2045 + installation position + part name

Common part groups pro 40-10 a NJ2045

Drivetrain a axle components

Front axle, driveshaft a differential components require careful checking. Spline count, shaft length, seal dimensions a axle configuration může vary. Photographs should show both ends ze dne component a stamped reference number.

Suspension a steering

Pro rods, joints, bushes, shock absorbers a mounting hardware, confirm s installation position a measure s fixing points. left-hand component nemusí být interchangeable with její right-hand counterpart.

Engine a cooling system

Confirm s engine model before ordering filters, hoses, mounts, cooling parts nebo internal engine components. Vehicles described under s same commercial model nesmí být použit identical engine-related parts.

Body, door a sealing parts

Door handles, locks, window components a sealing strips should být checked using photographs kabiny, door type a mounting arrangement. Length a cross-section measurements jsou particularly useful pro seals.

Electrical parts

Switches, lamps, sensors a dashboard components should být matched podle connector shape, pin count, voltage a reference number. Never assume that a visually similar electrical component má same pin configuration.

Vzduch intake a overland equipment

Snorkels a modified intake components require confirmation ze dne vehicle body, intake route a mounting positionJedna. example je Iveco Daily 4x4 snorkel referencing OEM 93933451 a 97251831.

A practical fitment-check workflow

Použití this process before purchasing:

1. Record VIN, model year a engine.

2. Find a photograph s original OEM number.

3. Photograph s complete part v jeho installed position.

4. Remove s part only when safe a record klíč dimensions.

5. Compare connectors, mounting holes, splines a orientation.

6. Send s information na supplier pro confirmation.

7. Keep starý component until s replacement má been installed successfully.

Information workshops should include v enquiry

A good enquiry vá short ale specific:

Vehicle: Iveco Daily 4x4 40-10
Year: [year]
Engine: [engine]
VIN/chassis: [number]
Required part: [part name a position]
OEM number: [number, pokud available]
Delivery country/postcode: [location]
Photos a dimensions: attached

This information helps avoid delays a reduces s risk ze ordering a similar-looking ale incompatible part.

Worldwide sourcing a shipping

Availability pro older 4x4 vehicles changes frequently. Before ordering, confirm current stock, exact package contents a shipping method available pro destination. Heavy nebo oversized components může need a different shipping quotation from small service parts.

SUONAMA supplies hard-to-find replacement a upgrade components pro Iveco Daily 4x4 a related platforms. Customers může browse s NJ2045 parts catalogue nebo request fitment confirmation using photographs, OEM numbers a vehicle information.

Important fitment note

References do vehicle names a OEM numbers jsou provided do help identify compatibility. Always compare s original component a vehicle details before installationPokud vehicle má been modified, include photographs ze dne relevant system v enquiry.